888 438 9936 (US & Canada) or 860 678 0371 | [email protected] | www.SpecialtyPhotonics.com
13
STEP
6
Install Crimp Sleeve
• Divide the aramid yarn into approximately
two equal halves.
• Fold both halves of the aramid yarn back over the cable an-
chor. Be sure the fiber is centered in the cable anchor.
• Slide the CRIMP SLEEVE over the cable anchor and aramid
yarn until it bottoms out on the cable anchor.
Step 6 continues
onto the next page
Á
Crimp from Step 5: Note
position of aramid yarns
in relation to this crimp.
Maintain this position
here and in Step 7.
