Furukawa Unic URW370C4U Series, Operation & Maintenance Manual

Page: 195 / 248

15-1
15. WATER SUPPLY AND LUBRICATION TO CARRIER
1.
Clean filling ports and grease nipples thor-
oughly before carrying out lubrication.
2.
Always supply new lubricant and prevent
dusts from entering inside.
3.
When supplying grease into each grease
nipple, be sure to inject it until old grease is
forced out of it.
Lubricate according to “Lubrication chart”
and keep the following instructions in mind
when carrying out filling water and lubrica-
tion.
Precaution when
carrying out filling
water and lubrication
• Be sure to stop the engine, and store the boom and the outriggers
before carrying out filling/replacing lubricant and/or fuel.
• A fire source such as smoking cigarette in mouth is strictly prohib-
ited.
• Do not rush to start supply of water, filling fuel, and lubrication as the
engine and the parts close to the engine is heated to a high tempera-
ture immediately after the engine has been stopped.
WARNING
•
In order to ensure smooth oper-
ation of each part of the crane,
minimum wear, and longer
service life, be sure to supply
lubricant as well as hydraulic oil
which is indispensable to drive
hydraulic equipment.
•
Warranty will not be given, even
if it is within the period to be
applied, for failure to observe
the replacement of lubricant as
specified
.
CAUTION