Furukawa Unic URW370C4U Series, Operation & Maintenance Manual

Page: 121 / 248

12-15
U-WAVE, Radio remote control device, (Option)
(3) When stopping the crane operation, return
the “speed lever” slowly, and then return
the “selector switch”.
(4) Depression of the “horn switch” activates
the horn on the vehicle.
Use it when calling attention to those who
stand around the vehicle.
Horn switch
When operating the crane with the radio remote control transmitter, be
sure not to touch any of manual levers as manual levers shift simultane-
ously.
WARNING
Remarks
• Switches mounted on the remote
controller are ON/OFF type which
can be actuated with a light touch.
Do not apply strong force as it may
cause damage to the switches.
• When the same radio wave (of speci-
fied small power radiation type radio
system) is being used near by work-
ing site, response time of the crane it
takes from the time when the radio
remote control devise has been oper-
ated may become longer to some
extent which is not a fault.
• When operating with the remote con-
troller, working speed may become a
bit slower than that of manual opera-
tion.