Furukawa Unic URW370C4U Series, Operation & Maintenance Manual

Page: 138 / 248

12-32
U-WAVE, Radio remote control device, (Option)
5.
◆
Starting/Stopping engine
Slewing C.W./C.C.W.
switch
Mode switch
• When the engine is to be stopped for a long period of time, be sure to
turn OFF the engine key on the side of crane.
If the engine is being stopper by radio control transmitter for a long
time during which power to transmitter is turned ON, shortening the
life of batteries results.
• The radio control system carries out system diagnosis automatically
every time when power is turned ON.
Do not operate the crane while the system diagnosis is being carried
out.
(Do not touch any one of switches and levers during this period.)
If the crane is operated during system diagnosis, voice mes-
sage, “Beep, Service remote control, Service remote con-
trol”, sounds and the crane is turned into inoperable conditions.
If this happened, depress the reset switch in the control box to carry
out system diagnosis again.
• If the voice message, “Beep, Service remote control, Service remote
control”, is issued when turning ON the power despite the fact that
the crane has not been operated, ask a UNIC authorized service shop
for repair as failure in the radio control system is suspected.
The engine can be started and stopped from
the radio control transmitter.
(2) Turning the selector switch to “slew-
ing C.W.” with the “mode switch” being
depressed allows the engine to stop.
(1) When the engine key is turned ON, turn-
ing the selector switch to “slewing
C.C.W.” with the “mode switch” being
depressed allows the engine to start.
CAUTION