Turn right (clockwise) to tighten
Page 5 of 6
#A x 8 pcs
#B x 8 pcs
#C x 8 pcs
#I x 4 pcs
#A x 8 pcs
#B x 8 pcs
#C x 8 pcs
I.
Align the 2 corner brackets
(#I) assembled on the 2 side
rails (#2) with the pre-drilled
holes on the right and left side
of the headboard (#1).
II.
Prepare 4 bolt assemblies by
inserting FIRST the lock
washer (#B) onto the bolt (#A)
and then the flat washer (#C)
onto the SAME bolt (#A), in
that order.
III.
Insert the bolt assemblies
through the holes of the 2
corner brackets (#I) using the
Allen wrench (#F) to lock them
with the right and left side of
the headboard (#1).
IV.
Repeat the process above to
assemble the other 2 corner
brackets (#I) on the other ends
of the 2 side rails (#2) onto
the footboard (#3).
Turn right (clockwise) to tighten
I.
Align the round holes of the
2 corner brackets (#I) with
the pre-drilled holes of the
side rail (#2).
II.
Prepare 4 bolt assemblies
by inserting FIRST the lock
washer (#B) onto the bolt
(#A) and then the flat
washer (#C) onto the SAME
bolt (#A), in that order.
III.
Insert the bolt assemblies
through the round holes of
the 2 corner brackets (#I)
and secure those bolts using
the Allen wrench (#F) to lock
them with the side rail (#2).
IV.
Repeat the process above to
assemble the remaining 2
corner brackets (#I) onto the
other side rail (#2).
Summary of Contents for CM7017EK
Page 2: ...Page 2 of 6 ...
Page 8: ...Page 2 of 6 ...
