Page 4 of 6
Remove the cushions (#4) and the slats (#6) from behind the zipper of the
back of the headboard (#1).
#A x 8 pcs
#B x 8 pcs
#C x 8 pcs
#H x 8 pcs
Turn right (clockwise) to tighten
I.
Align the 2 support rail legs (#7) with the pre-drilled holes of the support rail
(#5).
II.
Prepare 4 bolt assemblies by inserting FIRST the lock washer (#B) onto the
bolt (#A) and then the flat washer (#C) onto the SAME bolt (#A), in that
order.
III.
Insert the bolt assemblies through the pre-drilled holes of the support rail
(#5) and the 2 slat support legs (#7) using the Allen wrench (#F).
IV.
Tighten the 4 hex nuts (#H) onto the same bolts (#B) using the wrench (#G)
to secure the parts together.
V.
Repeat the process above to assemble the remaining two support rail legs
(#7) onto the other support rail (#5).
Adjust the levelers on Step 5.
X 2
Summary of Contents for CM7017EK
Page 2: ...Page 2 of 6 ...
Page 8: ...Page 2 of 6 ...
