Page 4 of 5
I.
Align the right H/B side (#2R) with
the pre-drilled holes on the right
side of the headboard (#1).
II.
Prepare 4 bolt assemblies by
inserting FIRST the lock washer
(#D) onto the bolt (#A) and then
the flat washer (#E) onto the
SAME bolt (#A), in that order.
III.
Insert the bolt assemblies through
the pre-drilled holes of the
headboard (#1) using the Allen
wrench (#G) to lock them with the
right H/B side (#2R).
IV.
Repeat the process above to
assemble the left H/B side (#2L)
onto the other side of the
headboard (#1).
Turn right (clockwise) to tighten
#A x 8 pcs
#D x 8 pcs
#E x 8 pcs
I.
Align the 2 HB/FB legs (#5
with the pre-drilled holes
underneath the headboard
(#1).
II.
Prepare 2 bolt assemblies by
inserting FIRST the lock
washer (#D) onto the bolt
(#C) and then the flat washer
(#E) onto the SAME bolt
(#C), in that order.
III.
Insert the bolt assemblies
through the holes of the 2
HB/FB legs (#5) and secure
those bolts using the Allen
wrench (#G) to lock them with
the headboard (#1).
IV.
Repeat the process above to
assemble the remaining 2
HB/FB legs (#5) onto the
footboard (#4).
#C x 4 pcs
#D x 4 pcs
#E x 4 pcs
Turn right (clockwise) to tighten
Note: Right and left are determined by facing the
front of the bed in its upright position.
