6
electrical forces that are beyond the capabilities of any TVSS device
to absorb without some degree of damage. In the rare instance that
this occurs, the green “Protection OK” LED indicator located on your
front panel will turn off. If this happens, some level of protection from
voltage surges will remain, but the Furman’s clamping voltage rating will
be compromised. The unit must be returned to Furman Sound, or an
authorized Furman Service center for repair.
Troubleshooting
Symptom
: No power to the AC outlets.
Possible Cause
: Circuit breaker has tripped due to excessive load.
Action Needed
: Unplug one piece of equipment from the
AC-5 / AC-0 E, and push the re-set tab into the circuit
breaker bezel.
Symptom
: No power to the AC outlets, even after the circuit breaker
has been re-set.
Possible Cause
: Protection devices are damaged.
Action Needed
:
Contact the Furman Service Department
at 707-763-00.
Installation
The AC-5 / AC-0 E can be conveniently and inconspicuously
mounted within an equipment rack or on the rear panel of your video
display, using the included brackets.
Summary of Contents for AC-120 E
Page 1: ......
