www.funtronic.eu
7
Set installation (short description)
2.1
ONEVO FLOOR
Set installation
All the elements required to mount
the
onEVO Floor
set are included in the box. The whole
installation process is presented in the following several steps:
STEP 1
STEP 2
Bring grounded power supply cable near
the
onEVO Floor
.
Attach the hanger bracket to the ceiling using the 4 (four) expansion bolts
supplied. For different types of ceilings it may be necessary to use different
methods to install the bracket.
STEP 3
Hang
the
onEVO Floor
on the mounted ceiling hanger bracket. In case of a
suspended ceiling, the hanger should be fixed directly to the ceiling and
extended with the adjustable arm (included). Level the whole unit and tighten
the assembly with the enclosed fixing screws.
STEP 4
Connect the power cord to the socket on the top panel of
the
onEVO Floor
and switch the power button into position “1”. A red light will light up on the
front panel.
• The size of the displayed image depends on the height at which the device is mounted. The higher the onEVO
Floor, the larger the image projected. Optimal working conditions can be achieved by installing the device at
heights between 2.0 m and 4,5 m. Example image sizes are given in Section 6 “Technical specifications”.
• The method of mounting the hanger onto the ceiling depends on the type of the ceiling. Before starting the
installation of the device, check the type of the ceiling and choose an appropriate (safe) method of installation.
• For a detailed description of the installation, please refer to the “
Installation Manual
” supplied with the unit.
IMPORTANT !
CIELING
HANGER
ONEVO FLOOR
Summary of Contents for OnEvo Floor
Page 1: ...User Manual ALL RIGHTS RESERVED ...
Page 2: ......