www.funtronic.eu
8
ONEVO FLOOR
Set installation
LAN installation
2.2
The onEVO Floor
has a built-in LAN port (access to computer network).
During the installation, we suggest connecting the device to the Internet by connecting a
LAN cable to the RJ-45 port on the top panel of the device or by using the built-in wireless
Wi-Fi adapter.
• Please use a fixed LAN connection when it is impossible to use Wi-Fi.
• If you do not have access to the Internet, you can order a flash drive with an update. Connect the flash drive via
the USB input port on the top panel of the device.
Turning the device on and off
2.3
To switch on the device, press the switch on button on the remote control. To switch off the
device, proceed in the same way by pressing the switch-off button.
IMPORTANT !
• While the device is switching off, the lamp in the projector cools down. It may take a few minutes. Turning the
unit on again will be delayed by the time it takes to cool down the lamp in the projector.
• It is not allowed to disconnect the device from the power supply before it has cooled down (before hearing a
double beep) at the risk of invalidating the warranty.
• For optimum durability and reliability, disconnecting the power supply or switching the device on with the main
switch is allowed when the red signal light is constantly on.
Summary of Contents for OnEvo Floor
Page 1: ...User Manual ALL RIGHTS RESERVED ...
Page 2: ......