11
General information on building a Beach Volleyball court with City Beach ground plates:
When building a sand court we suggest to fill up the sand first of all. Afterwards you can just dig in the City Beach ground
sockets and set up the net system.
We consider a permanent sand level of 40-50 cm as ideal. It is recommended to fill up the sand a little bit higher at the
centres of the playing field halves. It will be moved away towards the court surrounds by the players. Please make sure to
create a minimum sand level of 40 cm around the ground sockets for this installation option.
Example: Approximately 250 tons sand are required for a sand court with 14 x 22 m dimensions (for leisure sports) and a
sand level of approximately 45 cm. Calculation: volume in m³ x density factor (e.g.: 1,8 - depending on the grain size and
the sand quality).
Minimum Sand level: 40 cm
Insert square timbers into T-base
Mark the outline of the square timbers
Make excavations according to outlines
Secure with suitable screws
Set into position: ground sockets together with inserted square timbers
10 m (with a 8.5 m net)
11 m (with a 9.5 m net)
OPTION: CITY BEACH
Assembly
Required for assembly:
Pressure-treated square timbers, 6 pieces, each 1500 x 88 x 88 mm (maximum dimensions: 1500 x 90 x 90 mm), suitable
for permanent ground contact
