MB150UC
1
Rev. 01/09/08
ASSEMBLY INSTRUCTIONS
Step 1
Place the Locking Top and Drawer Unit (#1) on its back. Carefully open the Locking
Top and lay it back against the ground.
Step 2
Slide chrome legs (#2) into square holes in corners of Locking Top (#1) until bolt holes
are aligned at top of legs.
Step 3
Determine on which side of the cart the handle will be mounted. Then, insert two long
bolts (#7) with two flat washers (#10) into the aligned holes in handle, locking top and
legs. Fasten nuts (#9) using flat washers (#10) and lock washers (#11). Repeat this
procedure for other corners using short bolts (#8).
Step 4
Slide bottom tray (#15) onto legs and fasten as in Step 3.
Step 5
Insert casters (#3, #4) into the hole of plastic inserts (#5).
NOTE:
Insert the two locking wheels (#3) at the same end of the cart.
Step 6
Return cart to upright position.
Step 7
Using the screws (#16) provided, install drawer handles by aligning pre-drilled holes in
drawers with slots in handle. Tighten all screws securely.
Tools Needed for
Assembly:
Also Available:
RS8006HDL
Drawer Handle (for Red, Black or Blue Cart)
RS8006HDLB
Black Drawer Handle for Yellow Cart
RS8008LK
Lock with Two Keys
RSRBSLIDEC2
Clip-On Roller Bearing Slides (One Pair)
RS150UCSD
Safety Device
MB150UC
Ultimate Cart
Item Part
No.
No. No.
Req’d Description
2
RSSC7L
2
Extra Long Chrome Leg/ea.
3
RS5LC
2
Locking Caster/ea.
4
RS5NLC
2
Non-Locking Caster/ea.
5
SCPP1
1
Set of 4 Plastic Inserts
6
RS150UCBK
1
Bolt Kit (Incl. #7, 8, 9, 10, 11, 16)
12
MBD150UCB-1
1
2-1/4" Replacement Drawer #1* (Red)
MBD150UCB-1BK
2-1/4" Replacement Drawer #1* (Black)
MBD150UCB-1BL
2-1/4" Replacement Drawer #1* (Blue)
MBD150UCB-1YE
2-1/4" Replacement Drawer #1* (Yellow)
13
MBD150UCB-2
1
3" Replacement Drawer #2* (Red)
MBD150UCB-2BK
3" Replacement Drawer #2* (Black)
MBD150UCB-2BL
3" Replacement Drawer #2* (Blue)
MBD150UCB-2YE
3" Replacement Drawer #2* (Yellow)
14
MBD150UCB-3
1
4-1/2" Replacement Drawer #3* (Red)
MBD150UCB-3BK
4-1/2" Replacement Drawer #3* (Black)
MBD150UCB-3BL
4-1/2" Replacement Drawer #3* (Blue)
MBD150UCB-3YE
4-1/2" Replacement Drawer #3* (Yellow)
15
RS8007
1
Replacement Tray (Red)
RS8007BK
Replacement Tray (Black)
RS8007BL3
Replacement Tray (Blue)
RS8007Y
Replacement Tray (Yellow)
16
RS150UCTA
2
Replacement Tray Assembly (Red)
RS150UCTABK
Replacement Tray Assembly (Black)
RS150UCTABL
Replacement Tray Assembly (Blue)
RS150UCTAYE
Replacement Tray Assembly (Yellow)
PARTS LIST
8mm x 70mm
8mm x 46mm
(8)
(16)
(8)
(12)
Bolt Kit (#6) included for
attaching legs and tray to
MB150UC cart:
10 mm
or
#3
Phillips
(2)
(6)
7
8
9
10
11
16
* See other side for
operation of safety device.
RS150UCSD
