Page 29
11
ATTACH TWIRLY WHIRLY BARS x2
Twirly whirly bars x2
from steps 4 & 9.
Tighten all grub screws.
+ 360
o
1. Adjust straight through
fitting to align level with
twirly whirly bars. Reuse
twirly whirly removed
in step 4 & newly assembled
one from step 9.
2. Tighten all grub
screws fixing twirly
whirlys to legs.
1. Check level and square -
Loosen and adjust if not.
2. Hammer in pegs 6x.
3. Check all fixings are fully tight.
12
SECURE TO GROUND
Four pegs for gym
bar base plate.
13
1. Ensure all swing hook bolts are firmly tightened.
2. Check that all other grub screws and rung bolts on your frame are fully tightened.
3. The entire Funky Monkey Bars® frame is pegged down.
4. Load Twirly Whirly bars - see frame assembly instructions or website http://www.funkymonkeybars.com/pages/videos
Please refer to the maintenance steps at the back of the booklet.
FINAL CHECKS
