© 2018
Order #XXXXX
Locked layer contains
placeholder marks.
Lower & secure the Locking Bars.
2
Extend Spacer Bars & connect the two frames using screws & hex nuts.
3
Expand the two aluminum
frames & place side by side.
1
Spacer
Bar
Spacer
Bar
screw
hex
nut
Spacer
Bar
Locking Bar
Attach lights by sliding the sections together.
5
Qty. 2
Example of
Finished
Assembly
4
Attach rubber rings to graphics, as shown. Hook rings around metal pins.
Attach Shelves
(see opposite page)
6
8
Attach Case-to-Counter
graphics to cases.
When installed
Qty. 5 Lights
Velcro tabs
on back hubs
BACK VIEW
7
Attach left & right Fabric Backers to Velcro tabs on back of frames.
Then affix middle Backer to Velcro on left & right backers.
Backer
Backer
Backer
SETUP INSTRUCTIONS
If you would like to tell us about your experience with your setup instructions please email us at
Quadro FG-205 10’x20’ Pop-up Display
