1x
Short Tee D-101
Page 31
3
EXISTING FRAME - PREPARATION
1. Loosen all grub screws on short tee A &
base plate B
2. Remove pegs from twirly whirly base plate
& on leg where dip bar is to be installed.
THE FOLLOWING DIP BAR ADD-ON ASSEMBLY INSTRUCTIONS WILL BE DEMONSTRATED ON LEG A (STEP 2)
Installation on a swing leg (C or D -step 2) also involves removing the twirly whirly bar and the lower base plate.
A
B
4
REMOVE TWIRLY WHIRLY BAR & LEG BASE PLATE
1. Remove twirly whirly from
leg and place to one side.
2. Lift leg slightly and remove
base plate temporarily.
5
ATTACH SHORT TEE & REPLACE BASE PLATE
With leg still lifted, slide on
short tee ‘C’ and reattach base plate.
Hand tighten short tee half way
between leg rung and base plate.
Fully tighten grub screw on base plate.
2x
+ 360
o
C
C
