On flat level ground slide fittings onto
gym leg tube. Ensure reducing tee
is same height as on main frame, then
fully insert chin up tube. Tap in end cap
Fully tighten all grub screws.
7
ASSEMBLE GYM BAR
1x
Plastic End Cap
1x
Base Plate D-131- 4 hole
1x
Straight Through D-119
1x
Reducing Tee
D-101 D48-B34
1x
Chin up Tube
33Dia x 1150mm
1x
Gym Leg Tube
50Dia x 2300mm
Ensure 4 hole base plate.
Desired chin up tube height
A
6
SLIDE ON SHORT TEE & REDUCING TEE
Depending on desired height
of Chin up tube replace removed
short tees from step 5 with
1x reducing tee and
reuse 1x short tee.
C could be above A if gym
bar selected height is above
the monkey bar ladder.
Fully tighten all grub screws.
C
Fully tighten all grub screws.
Page 27
1x
Reducing Tee
D-101 D48-B34
Short Tee
(reused step 5)
+ 360
o
IF ATTACHING THE GYM BAR ADD-ON TO SWING LEG C or D (STEP 2) REMOVE TOP ELBOW AND TWIRLY WHIRLY THEN
SLIDE ON REDUCING TEE AND REATTACH TOP ELBOW USING A SIMILAR PROCEEDURE TO STEPS 3-6
