21
VNS 102V2
11/2009
General description
The VNS 102V2 is the advanced development of the proven video network streamer VNS102 with 1 digital
signal processor (DSP) and 2 video connections for the powerful support of video surveillance systems via LAN
or Internet.
Compared to the previously used standards, the advanced simple profile MPEG-4 coding provides a much
better image quality for dynamic image sequences with the same system load. This is a very important
advantage for transmission and recording.
The device can be configured via a web browser (HTML) and the Funkwerk plettac management system
p.o.s.a. In case of alarms, MPEG-4 sequences can be recorded in the local memory. The length (also previous
history), frame rate and image quality can be configured. The event triggering the alarm is also forwarded to a
central management system. Live images and saved sequences are transmitted via LAN to the surveillance
station.
Depending on the customer's network strategy, all available networks can be used with MPEG 4 advanced
and/or standard profiles at full resolution ranging from broadband LAN and ISDN up to GMS. The applied
solution also allows the customer to select a freely scalable minimum image quality with variable frame rate to
minimise the system load.
Notice:
Only use this operating manual for the connection of the VNS 102V2 and its initial commissioning. Details,
special settings and function notices are included in the Technical Documentation 43522942.91.
For information about the power supply (TM11) as well as the layout of the 19" slot, please refer to the
Installation Manual 43435-941.23 for TM11.
Maintenance
The electric safety (power supply) has to be checked at regular intervals. Always switch off the power supply
prior to servicing the device. Only use non-pressurised, solvent-free cleaning agents.
Troubleshooting
No function (all LEDs are off)
Check the operating voltage
No image
Check all connections as well as the entire configuration.
Other function errors
See Technical Documentation VNS 102V2
In case of other errors, notify the authorised service personnel. Spare devices are available at short notice in the
factory (subject to a valid maintenance contract).
Funkwerk plettac electronic GmbH
Repairs DE
Würzburger Straße 150
D-90766 Fürth/Bavaria
Tel. 01805 671205
Fax 0911/75884-100
E-mail:
http://www.cctv-systeme.com
Summary of Contents for plettac VNS 102V2
Page 19: ......
