Funkwerk bintec R4100, User Manual

Page: 32 / 36

4
30 bintec User’s Guide Frame Relay
Multiprotocol over Frame Relay Submenu
Table 4-9: A
DVANCED
S
ETTINGS
menu fields
RIP S
END
and RIP R
ECEIVE
contain the following selection options:
Route Announce Possible values:
■
up or dormant (default value): Routes are
propagated if the interface’s status is up or
dormant .
■
always : Routes are always propagated in-
dependent of operational status.
■
up only : Routes are only propagated if the
interface status is up .
Proxy ARP Enables the gateway to answer ARP requests
from the own LAN acting for the defined
WAN
partner. Possible values: see
table “Proxy ARP
selection options,” on page 31.
Van Jacobson Header
Compression Reduces the size of the TCP/IP packet. Possi-
ble values:
■
on : VJHC activated.
■
off
: VJHC deactivated.
Description Meaning
none (default value) Not activated.
RIP V2 multicast Only for RIP S
END
.
The gateway waits for version 2 RIP packets
with RIP V2 multicast address 224.0.0.9.
RIP V1 triggered RIP V1 messages are sent rsp. received and
processed as per RFC 2091
(Triggered
➤➤
RIP ).
Field Description