Funkwerk bintec R4100, User Manual

Page: 28 / 36

4
26 bintec User’s Guide Frame Relay
Multiprotocol over Frame Relay Submenu
Table 4-6: ADDEXT menu fields
The M
ODE
field includes the following selection options:
Table 4-7: M
ODE
selection options
The
S
OURCE
P
ORT
and
D
ESTINATION
P
ORT
fields contain the following selection
options:
Source Port Only for P
ROTOCOL
= tcp or udp .
Source port number or range of source port
numbers.
Destination Port Only for P
ROTOCOL
= tcp or udp .
Destination port number or range of destination
port numbers.
Description Meaning
always Always use the route.
dialup wait Use the route if the interface is " up ". If the inter-
face is " dormant ", dial and wait until the inter-
face is " up ". Otherwise reroute.
dialup continue Use the route if the interface is " up ". If the inter-
face is " dormant ", dial but reroute until the inter-
face is " up ". Otherwise reroute.
up only Use the route if the interface is " up ". Otherwise
reroute.
Description Meaning
any (default value) The route is valid for all
➤➤
port numbers
.
specify Enables the entry of a port number.
specify range Enables the entry of a range of port numbers.
priv (0...1023) Privileged port numbers: 0 ... 1023.
Field Description