4
18
bintec User’s Guide
Frame Relay
Multiprotocol over Frame Relay Submenu
The
IP
submenu consists of the following additional submenus:
■
B
ASIC
IP S
ETTINGS
■
M
ORE
R
OUTING
■
A
DVANCED
S
ETTINGS
.
4.2.1
Submenu Basic IP-Settings
The fields of the
B
ASIC
IP-S
ETTINGS
submenu are described below. When
T
RANSIT
N
ETWORK
is set to
yes
, the following screen is displayed (example
addresses are used here):
To be able to transfer IP datagrams between two remote LANs, the gateway
must know the route to the respective destination network. In the
IP
menu you
can define the basic routing to the selected WAN partner. For example, you can
generate a default route to the partner gateway.
Default route
All data is sent automatically to the WAN partner on a default route, if no other
route matches.
You can configure several default routes on your gateway, but only one can be
active. Make sure that you set different values for
M
ETRIC
, if you configure more
than one default route.
R4300 Setup Tool
Funkwerk Enterprise Communications GmbH
[FRAME RELAY][MPR][ADD][IP][BASIC]: IP-Settings (mpfr1) MyGateway
IP Transit Network yes
Local IP Address 192.168.100.1
Partner IP Address 192.168.100.2
Default Route no
Remote IP Address 192.168.1.0
Remote Netmask 255.255.255.0
SAVE CANCEL
