FunkTronic Major BOS 8a, Manual

Page: 27 / 36

mbos8a_eng (13.03.2014)
- 26 -
Kompetent für Elektroniksysteme
mbos8a_eng (13.03.2014)
- 27 -
Kompetent für Elektroniksysteme
EEPROM-Adressen
(continued)
register programming for
054 selection analogue or digital radio (SW V5.2 or newer)
0 = analogous radio, 1 = digital radio
bit 0 - 3: radio 1 bis 4
bit 4 - 7: radio 5 bis 8
080 predefined circuits to which forwarding is active upon long
pressing of the loudspeaker button of the respective circuit
BIT0 = circuit 1 ..... BIT7 = circuit 8
081-087 same as register 080, but for LS buttons of circuits 2-8
090-096 button activation BIT0-7: circuit 1-8 (active if BIT = 1)
090 button activation for button: circuit (Kreis)
091 button activation for button: VOL+
092 button activation for button: VOL-
093 button activation for button: LS
094 button activation for button: call 1 (Ruf 1)
095 button activation for button: call 2 (Ruf 2)
096 button activation for button: transmit (PTT)
100-107 threshold value for AF detection, circuit 1-8
108-10F delay time for NF-Erkennung, circuit 1-8: nn*50ms
Beispiel: 14 (HEX) = 20 (DEZ) * 50ms = 1s
110 forwarding mode for circuits 1 (BIT0) - 8 (BIT7)
BIT=0: AF controlled, BIT=1: carrier controlled
111 blocking time after end of forwarding until new forwarding is
possible: nn * 10ms
Example: 32 (HEX) = 50 (DEZ) * 10ms = 500ms
112 RS1 in addition to RS2 on this circuit
BIT0 = circuit 1 ..... BIT7 = circuit 8
113 RS1 only, if exactly one circuit is activated for forwarding
BIT0 = circuit 1 ..... BIT7 = circuit 8