mbos8a_eng (13.03.2014)
- 16 -
Kompetent für Elektroniksysteme
mbos8a_eng (13.03.2014)
- 17 -
Kompetent für Elektroniksysteme
Decoder Functions
Each TBBox4 can be equipped with max 4
UGA-modules
, so that up to 8 UGA-modules
are available for decoder functions when 2 TBBox4 are connected.
Each UGA-module can be programmed so that when certain signalings (single tones, tone
sequences) are decoded either one of the two switching outputs
DEC1
or
DEC2
briefly
(e.g. 1 sec)switches to ground (GND). See manuals
Monitoring-Interface TBBox4
and
Universal-encoder/decoder-module UGA00.
The status of the switching outputs
DEC1
and
DEC2
of all UGA-modules is transmitted to
the
Major BOS 8a
and causes the loudspeaker-AF of the corresponding radio channels
to be turned on(if it was turned off before):
a)
If the switching output
DEC2
is turned on because of the UGA-decoding, then the
loudspeaker-AF of the corresponding radio channel is turned on
permanently.
b)
If the switching output
DEC1
is turned on because of the UGA-decoding, then the
loudspeaker-AF of the corresponding radio channel is turned on
for the duration
T.
The
duration
T
can be programmed separately for the radio channels 1..8 in the
EEPROM
registers 03D...044
in steps of seconds (Value coded as
HEX-Number
in seconds).
register 03D
radio circuit 1
register 03E
radio circuit 2
register 03F
radio circuit 3
register 040
radio circuit 4
register 041
radio circuit 5
register 042
radio circuit 6
register 043
radio circuit 7
register 044
radio circuit 8
Ex factory the EEPROM registers 03D...044 are programmed with the Hex-value
‘0A’
(10*1sec=10sec).
Tape Control (switching contact)
The switching contact for controling the tape (Start/Stop) can be configured separately for
each of the two
TBBox4
units.
In
EEPROM registers 039 and 03A
you can code which radio circuits 1..8 (
bit 0..7
)
control the audio tape switching contact of the
TBBox4(1) and TBBox4(2).
register 039
audio tape switching contact
TBBox4(1)
controlled by
bit 0:
circuit 1
NO/YES (0/1)
bit 1:
circuit 2
NO/YES (0/1)
bit 2:
circuit 3
NO/YES (0/1)
bit 3:
circuit 4
NO/YES (0/1)
bit 4:
circuit 5
NO/YES (0/1)
bit 5:
circuit 6
NO/YES (0/1)
bit 6:
circuit 7
NO/YES (0/1)
bit 7:
circuit 8
NO/YES (0/1)
Summary of Contents for Major BOS 8a
Page 1: ...Major BOS 8a...
