mbos8a_eng (13.03.2014)
- 18 -
Kompetent für Elektroniksysteme
mbos8a_eng (13.03.2014)
- 19 -
Kompetent für Elektroniksysteme
Starting with software version V3.8 of the Major BOS 8 main board forwarding to
certain circuits can also be activated and deactivated via the RS232 interface. Therefor,
there is the new command '$Kxx'. xx (00-FF) corresponds to the active circuits as also
programmable in registers 080-087
Ab Software Version V3.8 der Major BOS 8 Hauptplatine lassen sich die Überleitkreise
auch durch die RS232 aktivieren und deaktivieren. Dazu gibt es den neuen Befehl
‚$Kxx‘. xx (00-FF) entspricht dabei den aktiven Kreisen wie auch im Register 080-087
programmierbar.
Example: $K00: no forwarding , $K03: forwarding to circuits 1+2
New Registers in MBOS 8a:
register 048: time for long pressing, (HEX) nn * 10ms
Example: 64 (HEX) = 100 (DEZ) * 10ms = 1s
register 080: predefined circuits to which forwarding is active upon long pressing of
loudspeaker button (of circuit 1)
BIT0 = circuit 1 ..... BIT7 = circuit 8
reg. 081-087: same as Register 080 for loudspeaker buttons of circuits 2-8
reg. 100-107: threshold value for AF detection (circuit 1-8)
reg. 108-10F: delay time for AF detection (circuit 1-8, nn*50ms)
Example: 14 (HEX) = 20 (DEZ) * 50ms = 1s
register 110: forwarding mode for circuits 1 (BIT0) - 8 (BIT7)
BIT=0: AF-controlled, BIT=1: carrier controlled
register 111: blocking time after end of forwarding until new forwarding operations
are possible, nn*10ms
Example: 32 (HEX) = 50 (DEZ) * 10ms = 500ms
register 112: RS1 additionally to RS2 for this circuit
BIT0 = circuit 1 ..... BIT7 = circuit 8
register 113: RS1 only if exactly one circuit is activated for forwarding
BIT0 = circuit 1 ..... BIT7 = circuit 8
Summary of Contents for Major BOS 8a
Page 1: ...Major BOS 8a...
