FunkTronic FT 635 UELE Manual Download Page 21

Page: 21 / 40

ft635ule_eng (21.06.2012)

- 20 -

- 21 -

ft635ule _eng(21.06.2012)

Kompetent für Elektroniksysteme

Reg. Function

368 1.- 3. digit: maximum duration of dial tone nnn * 1s

Configuration table for call progress tones

There is a configuration table for call progress tone detection in the EEPROM. In this table

you can define which tone/pause ratio will be detected as dial tone or busy tone.

Ex factory this table has already been programmed with two possible dial tones and with four

possible busy tones. In rare cases with some PABXs (Private Automatic Branch Exchanges)

or with certain AF noises on the telephone line there can be problems with call progress

tone detection. These usually can be solved by reprogramming or complementing this

configuration table. The table consists of maximally 19 entries (registers), each of which

shows a tone/pause ratio. By combining several entries complex call progress tones can

be decoded which consist of a combination of different tone/pause ratios.In this way it is

also possible to program the detecting of tones only after they have been decoded several

times in sequence.

If new call progress tones are to be programmed the exact periods of time of the new call

progress tones must be known. To facilitate this the UELE can output the current times.

Ex factory the following tones have been programmed:

dial tone:

- 1s tone / 4s pause

- 1s tone / 5s pause

busy signal:

- 400ms tone / 400ms pause / 400ms tone / 400ms pause

- 500ms tone / 500ms pause / 500ms tone / 500ms pause

- 240ms tone / 240ms pause / 240ms tone / 240ms pause

- 160ms tone / 480ms pause / 160ms tone / 480ms pause

Reg. Function

380 1. digit : exchange tone decoder n * 3,125%

380 2.- 4. digit: tone duration for continuous tone decoding nnn * 10ms

380 5.- 7. digit pause duration for pause decoding nnn * 10ms

380 8. digit: indicate decoded exchange tone times y/n (1/0)

381 - 399:

1. digit: type of exchange tone:

0=continued line

1=dial tone

2=busy tone, F=free

2.- 4. digit: tone duration nnn * 10ms

5.- 7. digit: pause duration nnn * 10ms

As examples the ex factory preset tones are described here:

Tone duration

Pause duration

381 11004000 dial tone

382 11005000 dial tone

383 20400400 busy tone

400ms

384 00400400 continuation

400ms

385 20500500 busy tone

500ms

386 00500500 continuation

500ms

387 20240240 busy tone

240ms

388 00240240 continuation

240ms

389 20160480 busy tone

160ms

480ms

Summary of Contents for FT 635 UELE









































Search results

Summary of Contents for FT 635 UELE

Reviews:

Brands by name

Popular brands

FunkTronic FT 635 UELE, Manual

Search results

Summary of Contents for FT 635 UELE

Reviews:

Brands by name

Popular brands