ATR833 / P/N 833-(xxx)-(2xx)
Operation and Installation
24
Document-No.: 01.1403.010.71e / Revision: 3.01
3.2 DPY – Energy Saving Mode (Aut. Display Darkening)
In order to save energy – and to extend the lifetime of the OLED display
– an
automatic display
darkening
can be configured.
ACT
123.450
SBY
118.910
DPY always on
With the
rotary knob the following options can be selected:
always on
No display darkening at all
xx
min off
Automatic darkening after
xx
minutes of user
inactivity (
xx
= range 1–30)
Reactivation of the darkened display is done by press of any key (except
key
I/O
)
or turn of any knob (the action of the key pressed is performed
when pressing the key again after the display turned on) or when
transmitting.
A short press of
SET
switches to the next configuration item, a long
press of
SET
exits the configuration menu.
This configuration item is not used for determining whether a
specific frequency is used with 8.33 kHz or 25 kHz channel
width, as this is done by the ATR833 automatically
depending onto the frequency value entered.
For more details see chapters 2.5.1 and 5.1.
Please keep in mind to enable 8.33 kHz channel selection
before flying into areas where 8.33 kHz channels are used.
Summary of Contents for ATR833-OLED
Page 2: ......
