ATR833 / P/N 833-(xxx)-(2xx)
Operation and Installation
20
Document-No.: 01.1403.010.71e / Revision: 3.01
6. Enter the name
•
by changing the selected character with
, and advancing the selection with
►
, just as when manually entering a
standby frequency.
ACT
124.350
SBY
124.350
MEM 07 KONSTANZ
7. Store the name
•
either
with a
long press
of
MEM
,
•
or
with a
long press
of
►
.
ACT
124.350
SBY
124.350
MEM 07 KONSTANZ
You can now leave the user memory access by pressing
MEM
twice or
by waiting for the timeout (12 seconds).
2.6 Dual Watch Operation
The ATR833 comprises one receiver, therefore DUAL-Watch
(simultaneously monitoring two frequencies) is implemented by
alternating automatically between the active and the standby frequency.
With dual watch mode active, basically the standby frequency is tuned in,
shortly interrupted in regular intervals by tuning in the active frequency
for a fraction of a second.
Every then detected radio signal on the active frequency has priority, and
pauses the dual watch monitoring of the standby frequency, as long as
the reception/transmission continues on the active frequency.
Transmissions are always done one the active frequency.
The dual watch mode is activated by pressing
DW
, and indicated by a
changing the “SBY” label for the standby frequency to “DW”.
ACT
123.450
DW
135.700
VOL 05
The dual watch mode is deactivated by pressing
DW
again, and by any
operations changing either of the frequencies.
Summary of Contents for ATR833-OLED
Page 2: ......