ATR833 / P/N 833-(xxx)-(2xx)
Operation and Installation
22
Document-No.: 01.1403.010.71e / Revision: 3.01
2.7 Transmission
By pushing the PTT button, the device starts transmission on the active
frequency. The operation of the transmission is indicated by “TX” in front
of the frequency used.
ACT TX 123.450
SBY
135.700
VOL 05
In order to avoid unintended transmissions, e.g. when having the PTT
button stuck (“stuck mic”), the transmitter automatically stops after two
minutes of transmission, and „TX“ is substituted by „Te“.
In order to re-enable transmission in this case, release PTT and push it
again.
2.8 Reception
When receiving, a „RX“ is shown in front of the active frequency. When
having dual watch active (see 2.6) this can be on the standby frequency,
too.
ACT RX 123.450
SBY
135.700
VOL 05
ACT 123.450
DW RX 135.700
VOL 05
When having more than one PTT button and microphone
equipped, it can be configured (chapter 3.3) to use only one
PTT button for transmissions.
Summary of Contents for ATR833-OLED
Page 2: ......
