21
EN
SweatStop® DE20 – Revison 002b – 2019-12-09
SweatStop® DE20
Dimensions:
172 x 116 x 41 mm
Weight:
270 g
Power source:
4 standard rechargeable NiMH batteries (= accumulators)
size LR / Baby / C connected in series
Capacity: min. 2500 mAh (delivery condition)
Note: Mixing different types of batteries is prohibited.
Do not mix new and old batteries, charge all batteries at
the same time.
Caution: Only use chargers for NiMH accumulator packs!
Operating conditions:
Temperature: from 5 °C to + 40 °C.
Max. relative humidity: 15 - 93 % humidity.
Atmospheric pressure rage of 700 to 1060 hPa-
Output:
Direct current (DC)
Ampere: 0 - 20 mA
Voltage: 0 - 40 V
Pulsed current (PC)
Ampere: 0 - 30 mA (peak)
Voltage: 0 - 60 V (peak)
Notice
When the DC plug of the charger is plugged into the charging socket, the treatment cannot be
conducted. The DC plug disconnects the electric circuit of the power supply. Before using the
device again, the DC plug must be unplugged from the charging socket.
Technical specifications
Cleaning and maintenance
• The device is free of maintenance.
• Disconnect the cables carefully. Do not bend or tie the cables.
• The device must be cleaned damp (not wet!).
• The device and the electrodes can be cleaned with all non-corrosive detergents normally used in
medical practices. The device must not be submerged in any kind of liquid.
• It is imperative that the sponge pouches are cleaned and laid out to dry after every treatment.
Take the electrodes out of the pouches for drying.
• After usage, the electrodes and the sponges are to be cleaned and disinfected in lukewarm
water.
