15
EN
SweatStop® DE20 – Revison 002b – 2019-12-09
SweatStop® DE20
Foot treatment
Please read the chapter “Basics” first before you go on!
Choose the current type according to your prescription or doctor’s recommendation – direct
current is more effective, but most patients prefer the comfortable treatment feeling of the pul-
sed current.
The current type, PC or DC, can only be selected when the device is turned off. Otherwise the
original choice will be kept.
To turn on the device, turn the switch (1) to the left. A text will appear on the display for 5 seconds;
this indicates that the device is running.
Now, check whether you have selected the correct current type. The first line on the display shows
if the device is set to „DC“ direct current or „PC“ pulsed current. Put your feet into the treatment
tubs – the water should cover only the areas affected by the hyperhidrosis – not the entire foot. If
necessary, adjust the water level.
When turning the button (1) clockwise, the amperage will be increased. The second line on the
display (5) shows the current flow
Direct current:
Turn up the amperage until the current is
noticeable, then turn it down again until
you can no longer feel it.
Pulsed current:
Turn up the amperage until the current is
barely noticeable.
