12
P
REPARATION
Settings Before Use
Setting date and time
1
Press for more than 1 second to turn
on the device.
- Power indicator lights up, and the following setting
menu will be displayed for the
fi
rst time.
Time setup
Year
2010
Month
01
Day
01
Hour
12 AM
Minute
00
2
Use
◄
/
►
to set [Year
[[
].
r
3
Move to the next item by using
▲
/
▼
,
then use
◄
/
►
to set all contents to suit
your preference.
Month
12
Day
19
Hour
11 AM
Minute
09
4
Press RECORD/OK to exit.
K
Notes
• If you turn off the device unless you press
RECORD/OK
during
[Time setup]
, this menu
shows up all over again until this setting has been
completed.
• This setting menu also displays automatically when
you turn on this device after you pressed Reset
button.
• To change the date and/or time later, press
to call up the menu and then use
▲
/
▼
/
◄
/
►
to
select
[Time setup]
in
[Setup]
.
Setting the video out
1
In live view mode, press
, then use
◄
/
►
to select [Setup].
- The setting menu will be displayed.
Video
Effect Setup
Pre-recording
2
Use
▲
/
▼
to select [Video out
[[
], then
t
press RECORD/OK.
Video Effect
Setup
Time setup
Video out
Firmware version
Format
3
Use
▲
/
▼
to set the content to suit your
preference, then press RECORD/OK.
Video out
NTSC
PAL
NTSC
Sets to NTSC for your TV NTSC Video/
Audio.(USA, Japan, etc.)
PAL
Sets to PAL for your TV PAL Video/Audio
system.(Europe, China, Australia, etc.)
4
Press
to exit.
Note
• This setting will be kept even if you press the
Reset button.
