Page 1
SSTE v2 Specifications
Impedance‐
Input impedance‐ 1.1megaohms
Output impedance switch set to Buffered (BUF)‐
10k ohms
Output impedance switch set to Buffer‐Bypass (BYP)‐
220K‐500K (
depending on where the ECHO
VOLUME knob is set)
Size
‐
9.56” wide x 7.8” deep x 6.3” tall (with lid on and closed)
Weight
‐
9.2 lbs.
Tape format
‐
You may only use the
Fulltone Echo Tape Cart (ETC‐2)
a normal Echoplex cart is the wrong size.
Carts made for the TTE and Echoplex will NOT function in a SSTE.
We try to only use BASF LGR‐50 tape for our Carts which is no longer made, but I have many thousands
of yards of it, enough for 30 years or more. It is one of the only tapes that works because it has a white
lubricated backing, helping to keep the tape from sticking, then binding.
You may also use the
Fulltone Tape Loop Transport (TLT),
giving the
choice of using any available ¼”
tape. Make the tape loop exactly the recommended length (see TLT box)
Electrical info‐
100‐120VAC, 60hz, 6 watts.
The wiring for the transformer can be easily modified for 220/240 VAC 50hz operation inside the unit.
Fuse‐
0.25amp/250mA 5mm x 20mm glass Slow‐Blow fuse.
Included‐
1 x Detachable 10’ IEC type AC power cable
1 x 3‐to‐2 Prong ground lift adapter for AC power cable
1 X ETC‐2 Tape cartridge (pre‐installed in SSTE)
Optional: Echo‐Cancel Footswitch‐
To cancel the echo on a SSTE v2, you can use a latching “amp channel switcher” footswitch that
grounds out the TIP of a ¼” male phono plug. But, if you want to have LED status indicators without
having to supply any power, the only footswitch to get is the
Fulltone Echo Cancel Footswitch
. Get
yours
here
