4. Record Track
Record a track of your hikes, drives, flights, sails or other outdoor activities. Once
saved, the track is added to the Tracks log.
For the Wifi-only iPad, distance and speed values may be inaccurate due to the fact that
location accuracy is only between 100 feet and 3 miles in Wifi mode. A reliable GPS
signal (indicated by a blue spinning globe) is required for accurate results.
US and Foreign Patents Granted and Pending.
Fullpower®, MotionX®, TapTap®, and ShakeShake® are registered trademarks of Fullpower Technologies, Inc.
All other trademarks remain the property of their respective owners. © Copyright 2003-2012 Fullpower Technologies, Inc. All rights reserved.
8
Graphs:
Speed and
altitude graphs are
populated after the track
is initiated. Graphs are
updated once per
minute; each interval is
an average over the past
minute of travel.
The tracking ball appears
when you tap and hold
the graph. Slide your
finger across the screen
to move the ball along
the graph. Instantaneous
values are shown in the
upper and lower right
corners.
Customize the data
displayed on the track
recorder by pressing and
holding any of the lower
data fields. Select a
category (general,
navigation, sensor,
elevation), then use the
picker wheel to define the
field. You may mix and
match units of your data
fields if desired. Enable or
reset custom fields from
Menu> Setup> Display>
Custom Fields.
