8. Map
(continued)
Track Types
A solid red line represents your path while recording a track with the
Track Recorder. Use the "Start Track", "Pause Track" and "Save Track"
controls on the MotionX-Track Recorder page to record and save your
track. (In MotionX-GPS v18.0 and above you may change the color of
your recorded track)
A dotted red line represents an interpolated path between two points
when signal has been lost.
A solid blue line traces your path when a GPS signal is active, but when
not using the Track Recorder. In the event that you forgot to start the
Track Recorder, you can still save these blue tracks to the Logbook. Press
the "Save Tracks" option in the menu that appears when you touch the
caliper button to combine all plotted tracks into a single track that will be
saved to the Logbook.
A dotted blue line represents an interpolated path between two points
when signal has been lost and the Track Recorder was not running.
A dashed green line from the arrow indicates the path to the waypoint
you have chosen as your destination using the Go To or Start Nav
buttons.
A dashed orange line represents a previously recorded track that is being
followed. A green start flag indicates the start of the track and a
checkered end flag indicates the end.
US and Foreign Patents Granted and Pending.
Fullpower®, MotionX®, TapTap®, and ShakeShake® are registered trademarks of Fullpower Technologies, Inc.
All other trademarks remain the property of their respective owners. © Copyright 2003-2012 Fullpower Technologies, Inc. All rights reserved.
18
