Connect Via Router (Recommended):
Connecting the Galvo to the router is the most reliable
way to establish a link to RE3.
1.
The Galvo comes with an ethernet cable(see Fig.
18).
Fig. 18
2.
Connect the cable to the ethernet ports on both
devices(see Fig. 19).
Fig. 19
Note: Ethernet port looks the same on all devices
Section IV.
Connectivity
Connect to Wi-Fi:
1.
Your machine should come with a device called a
dongle attached to the usb port. This device
enables your machine to connect to the wifi.
Make sure that it is there and connected.
Fig. 20
2.
Select the Network button on the top right of the
touch screen.
Fig. 21
3.
Select wifi and look for your network. Select it
and enter password
Ethernet Connection
The Fiber Galvo software is browser-based, meaning no download is required. RetinaEngrave v3.0 (RE3) is
locally hosted on the machine’s internal computer so it will function even without an internet connection. Using any
computer, only an internet browser (such as Google Chrome) is needed to access RE3. The easiest method is to
connect the Ethernet Cable that came with your Galvo.
Connect Directly to Computer:
Connecting the Fiber Galvo and the computer should only be done if the previous two options are not
possible. The Galvo can can connect to the computer via ethernet cable.
Note: The location of the ethernet port varies on computer models.Some computer may not have an
ethernet connection and may need an ethernet adapter.
9
