18
OPERATION (cont.)
Clearing a jammed fastener
If a fastener becomes jammed in the tool, disconnect the air hose and keep the
tool pointed away from you while clearing the jam.
1.
Pull back the sleeve on female quick connector to disconnect the tool from the
air supply.
2.
Remove fasteners from the tool.
3.
Pull the front guide latch, releasing the
front guide (fig. 10).
4.
Pivot front guide forward. Use a flat blade
screwdriver (not included) to remove the
jam (fig. 11)
5.
Close the front guide and lock the front
guide latcH.
WARNING!
Disconnect the tool from the air supply before clearing a
jammed fastener. Failure to do so could result in serious personal injury.
Fig. 10
Fig. 11