10
•
Keep bystanders away (when working in an area where there is a likelihood of
through traffic of people). Clearly mark off your operating area.
•
During operation be careful that fasteners penetrate material correctly and
cannot be deflected/misfired towards operator and/or any bystanders.
•
Only wear gloves that provide adequate feel and safe control of triggers and
any adjusting devices.
•
The tool must be disconnected from the air supply and rested on a flat
surface on its side when not in use.
•
During operation, debris from workpiece and fastening/collation system may
be discharged.
•
Always wear impact-resistant eye protection with side shields during
operation of the tool.
•
Appropriate hearing protection shall be worn.
•
The risks to others shall be assessed by the operator.
•
Ensure tool is always safely engaged on the workpiece and cannot slip.
•
Ensure the tool is correctly lubricated during use. Only use the correct
lubricant as specified in this manual.
•
Slips, trips and falls are major causes of workplace injury. Be aware of slippery
surfaces caused by use of the tool and also of trip hazards caused by the
airline hose.
•
Proceed with additional care in unfamiliar surroundings. Hidden hazards may
exist, such as electricity or other utility lines.
•
This tool is not intended for use in potentially explosive atmospheres and is
not insulated from coming into contact with electric power.
•
Never use oxygen or combustible gases for operating pneumatic tools as this
could create a fire and explosion hazard.
•
Do not discard the manual and safety instructions.
BRAD NAIL GUN SAFETY WARNINGS (cont.)
