-14-
Di gi ta l K ey pa d O pe ra ti on
DZB100 Series
Note:
Pressing the "Up" or "Down" button momentarily changes the parameter settings in
increments. Press and hold down either of these keys to rapidly run through the possible
settings.
STOP
Stop
Used to stop the AC drive operation.
Up / Down
Press the "Up" or "Down" button to change parameter settings.
These keys may also be used to scroll through different operating values or
pa rame ters.
FW D
RE V
Forward / Reverse
Used to toggle between forward and reverse operation.
Pressing this key will cause the motor t o ramp down to 0 Hz and then ramp up
to the preset speed in the opposite direction. By default, the digital keypad
controls the AC drive forward/reverse operation.
To control the forward/reverse operati on via the control terminal block,
c ha ng e t he F 1- 01 p ar am et er t o 0 00 1 o r 0 00 2 .
JOG
RUN
Jo g
Used to start the AC drive, then run at the jog frequency as set by the parameter
specified under F1-23 [Jog Frequency].
Program / Reset
Used to select the Normal mode of operation or to program the AC drive when
either the drive is running or h as stopped. Switch to the PRGM mode to select
a parameter or change the setting of a parameter. If the AC drive has stopped
due to a fault, press this button to reset the drive.
Ru n
Used to start the AC drive operation.
This key has no effect when the drive is set t o terminal run.
FUNC
DATA
Function / Data
Displays information on the AC drive status such as the reference frequency,
output frequency, or output current in the normal mode. While the driv e is in
the Program Mode, press this key once to display the current parameters.
After changing the parameters, press this key again to store the new parameters.
PRGM
RESET
Key
Description
