3 - 8
3. Press the “
▼
” key once to highlight the “Save” message.
<Europe>
<USA>
<Europe>
<USA>
<Europe>
<USA>
The transmitter channel can be changed by pressing the “Enter”
key.
During the data saving process, the “Writing” message will blink.
Do not turn off the equipment during this process.
The “Complete” message will appear when the channel setting
change is completed.
Make sure that the receiving monitor can receive the signal from
the transmitter after changing the channel setting.
<Europe>
<USA>
To backup the changed setting, keep pressing the “
▼
” key until
the “
” icon is highlighted as “
” and then press the “Enter”
key.
4. Select the “
” on the transmitter channel setting screen to return to the preset screen.
The equipment can be turned off on this preset screen.
