Fukuda Denshi LX-7120 Operation Manual Download Page 40

Page: 40 / 74

6. Measurement

●

ECG Display Screen (2)

ECG2 waveform, heart rate, pacemaker marker, remaining battery level, and
electrode check message are displayed.

NOTE

If a 3-electrode lead cable is used, this screen will not appear.

The LCD display will automatically turn itself OFF after 60 seconds if no
operation is done. To restart the LCD display, refer to page 29.

When the LCD display is active, press the

▽

button to move onto the next

waveform display screen.

【

Descriptions of the Screen

】

The descriptions of contents displayed on the LCD are as follows.

Indicates ECG 2.

Indicates the scale of the displayed
ECG.

One scale corresponds to 1mV.
In the left illustration, it can display ECG
waveform between -1mV and +1mV.

Displays the ECG waveform.

Displays the heart rate.

♥

is displayed in synchronization with

the heart rate.

Summary of Contents for LX-7120











































































Search results

Summary of Contents for LX-7120

Reviews:

Related manuals for LX-7120

Brands by name

Popular brands

Fukuda Denshi LX-7120, Operation Manual

Search results

Summary of Contents for LX-7120

Reviews:

Related manuals for LX-7120

Brands by name

Popular brands