background image

En-2

 CAUTION

Do not touch the switches with sharp objects. Doing so will 

cause injury, trouble, or electric shock.
Do not insert articles into the slit parts of this unit. Doing so 

will cause trouble, heating, or electric shock.

This appliance is not intended for use by persons (including 

children) with reduced physical, sensory or mental 

capabilities, or lack of experience and knowledge, unless 

they have been given supervision or instruction concerning 

use of the appliance by a person responsible for their 

safety. 

Children should be supervised to ensure that they do not 

play with the appliance.

]

1

1. INTRODUCTION

1-1. Safety precautions

The “SAFETY PRECAUTIONS” indicated in the manual con

-

• 

tain important information pertaining to your safety. Be sure 

to observe them. 

For how to operate each indoor unit, refer to the operating 

• 

manual attached with the relevant indoor unit.

Request the user to keep the manual on hand for future use, 

• 

such as for relocating or repairing the unit.

 WARNING

This  mark  indicates  procedures  which, 

if  improperly  performed,  might  lead  to 

the death or serious injury of the user.

 CAUTION

This  mark  indicates  procedures  which, 

if  improperly  performed,  might  possibly 

result  in  personal  harm  to  the  user,  or 

damage to property.

 WARNING

In the event of a malfunction (burning smell, etc.), 

immediately stop operation, turn off the electrical breaker, 

and consult authorized service personnel.  
Do not repair or modify any damaged cable by yourself.  

Let the authorized service personnel to do it. Improper work 

will cause an electric shock or a fire. 
This unit contains no user-serviceable parts. Always consult 

authorized service personnel for repairing, installation, and 

relocation of this product.  

Improper installation or handling will cause a product 

malfunction, an electric shock, or a fire. 

Do not touch with wet hands. It may cause an electric 

shock.
If children may approach the unit, take preventive measures 

so that they cannot reach the unit.  

Lack of preventive measures may cause an accident.

Do not use flammable gases near the unit. It may cause a 

fire from leaking gas.

 CAUTION

Do not set vessels containing a liquid on this unit. Doing so 

will cause heating, fire or electric shock.
Do not expose this unit directly to water. Doing so will 

cause trouble, electric shock or heating.
Dispose of the packing materials safely. Tear and dispose 

of the plastic packing bags so that children cannot play with 

them. There is the danger of suffocation if children play with 

the original plastic bags. 

Do not place electrical devices within 1 m (3.3 ft) of this 

unit. It may cause malfunction or failure.

Do not use fire near this unit or place a heating apparatus 

nearby. It may cause malfunction.

9380221043_OM.indb   2

8/22/2012   3:54:55 PM

Summary of Contents for UTY-RVN*M


























Reviews: