En-21
5-5. R.C. sensor control setting
Note
This function can be used only if the setting is activated
in the installation. To activate this function, consult au-
thorized service personnel.
1
In “Submenu” screen, select [R.C. sensor control] with
the [Cursor button (Up/Down)], and press the [Enter
button].
Date and time
Monitor
Screen
Filter sign
R.C. sensor control
Room temp. display
Off
Off
Mo 10:00
Setting:
Back:
Submenu
[
1/2
]
2
Select [On] or [Off] with the [Cursor button (Up/Down)],
and press the [Enter button].
Screen
Filter sign
R.C. sensor control
Room temp. display
Date and time
On
Off
Monitor
Mo 10:00
OK:
Cancel:
Submenu
[
1/2
]
When you set this setting to [On], the icon is displayed on the
“Monitor” screen.
To check the function, press the [Enter button] and select the
icon.
Cool
Monitor
High
°C
26
Menu
R.C. sensor control
Mo 10:00
End:
11
5-6. Room temp. display setting
1
In “Submenu” screen, select [Room temp. display] with
the [Cursor button (Up/Down)], and press the [Enter
button].
Date and time
Monitor
Screen
Filter sign
R.C. sensor control
Room temp. display
Off
Off
Mo 10:00
Setting:
Back:
Submenu
[
1/2
]
2
Select [On] or [Off] with the [Cursor button (Up/Down)],
and press the [Enter button].
Screen
Filter sign
R.C. sensor control
Room temp. display
Date and time
On
Off
Cancel:
Monitor
Mo 10:00
OK:
Submenu
[
1/2
]
When you set this setting to [On], the room temperature is
displayed on the screen.
Mode
Menu
Cool
Monitor
Room 28˚
C
Set temp.
Fan
High
°C
26
Mo 10:00
Note
Displayed room temperature is the approximate tem-
perature detected around this remote controller, and it
could be different from the actual room temperature. It
also be influenced by the installation environment of the
remote controller.
5-7. Key lock select setting
A locking function is provided to prevent careless operation by
children or outsiders. Release the lock on the “Monitor” screen
when operating.
To lock up:
When the [Cancel button] is pressed for about 3 seconds or
more continuously on the “Monitor” screen
.
To release the lock:
When the [Cancel button] is pressed for about 3 seconds or
more continuously on the “Monitor” screen, the lock is re
-
leased, and each applicable lock name on the screen turns
off.
9380221043_OM.indb 21
8/22/2012 3:55:02 PM
