En-6
2-2. Setting items in Menu
°C
26
Mode
Menu
Cool
Monitor
Set temp.
Fan
High
Mo 10:00
Menu
Function
Timer
Submenu
Mo 10:00
Setting:
Back:
Date and time
Monitor
Screen
Filter sign
R.C. sensor control
Room temp. display
Off
Off
Mo 10:00
Setting:
Back:
Submenu
[
1/2
]
Following items can be adjusted in Menu.
NOTES:
Items marked “–” in “Secondary unit” column cannot be adjusted from the remote controller that is specified as the second
-
•
ary control unit. Adjust the function on the primary unit.
Depending on the type of the indoor unit, some features cannot be set.
•
Settings and Display Items
Details
Operation
(See page)
Secondary
unit
Function
Air flow direction
Sets the airflow direction.
The airflow direction position adjustment and the swing can be
set.
8
O
Economy
The room temperature will be little higher than the set-temp
under cooling mode and lower than set-temp under heating
mode. Therefore, the economy mode is able to save more
energy than other normal mode.
9
O
Set temp. (tempera-
ture) auto return
The temperature automatically returns to the preset value after a
certain period of time has elapsed since the set temperature was
changed.
The set time can be set from 30 to 120 minutes in units of 10
minutes.
9
–
Set temp. (tempera-
ture) range limitation
Limits the range of the set temperature.
The temperature range can be limited through the operation
mode.
10
–
Timer
On timer
Use this timer function to start air conditioner operation. The tim-
er operates and air condition operation starts after the set time
has passed. The timer can be set up to 24 hours in advance.
Can be set up to 24 hours in units of 30 minutes.
11
–
Off timer
Use this timer function to stop air conditioner operation. The tim-
er operates and air conditioner operation stops after the set time
has passed. The timer can be set up to 24 hours in advance.
Can be set up to 24 hours in units of 30 minutes.
12
–
Weekly timer
Operation start and end times can be set to 1 week.
Up to 8 patterns of On/Off, operation mode, and temperature set-
ting can be set in 1 day.
2 sets of the weekly timer, [Weekly 1] and [Weekly 2], can be set.
For example, you can assign the [Weekly 1] for summer and
[Weekly 2] for winter. Then you only need to switch [Weekly 1]
and [Weekly 2] by the season.
13
–
Auto-off timer
Operation end time can be set if the air conditioning operation
has been started with the [On/Off button] of this remote
controller.
The set time can be set from 30 to 240 minutes in units of 10
minutes.
You can also specify the
valid hour in a day for this timer.
15
–
NOTE:
If the function you are selecting is restricted by [Management] function, following message is displayed in the operation
guidance display.
XXXXXX
XXXXXX
Restricted by the management function
Back:
9380221043_OM.indb 6
8/22/2012 3:54:57 PM
