38
5.
OPERA
TION
SETTING METHOD
5-4. TEMPERATURE SETTING
Enter the control mode to select the central control
number (the indoor units) whose temperature needs
to be changed.
Refer to “3-3. CONTROL MODE” for information
about control modes.
Press
TEMP.
to set the desired temperature. The set-
ting is applied to the indoor units associated with
the selected central control number. Because of the
change of the setting, LED
SET
will come on.
It is necessary to transmit the newly set information
to the relevant indoor units. Refer to steps 4, 5 and
notes of “3-3. CONTROL MODE” for details.
Notes
▲
: Press to raise the thermostat setting.
▼
: Press to lower the thermostat setting.
• Thermostat setting range
AUTO ................ 18 to 30
°
C
Heating .............. 16 to 30
°
C
Cooling / Dry ..... 18 to 30
°
C
• The thermostat cannot be used to set room temperature during the FAN mode (the temperature will not
appear on the display of the central remote controller).
• The thermostat setting should be considered a standard value, and may differ somewhat from the room
temperature.
CHECK
ACL
MASTER
ENERGY
ANTI
FAN
TIMER
SET
TIMER
DELETE
TIMER
DAY
CLOCK
ADJUST
DAY OFF
TEMP.
MEMORY
OPERATION
MEMORY
TEST
SET
CENTRAL
DELETE
BACK
GROUP
ZONE
ON OFF
TIME
CONTROL
CONTROL
FILTER
RESET
CONTROL
FREEZE
COPY
TIMER
MODE
SAVE
SETTING
SETTING