24
4. CENTRAL
CONTR
OL METHOD
Press
CENTRAL
CONTROL
to start setting of the centrally con-
trolling items.
An item selection cursor will appear.
Press
and use the cursor to select the cen-
trally controlling items to be performed.
A symbol will come on for the item that are being
set.
• Symbols will go out for those items that are not
being set. When it becomes aligned with the cur-
sor, it will start to flash.
Press
SET
to set the centrally controlling item
to be performed.
Press
DELETE
to cancel the item.
• The symbol comes on after the setting of the cen-
trally controlling item.
• Select
and all those other symbols will go out
because this centrally controlling item includes all
those other controlling items by prohibiting all
operation settings of standard remote controller.
Repeat the operations of step 3 and step 4 to per-
form the desired central control.
When all the settings have been completed, press
CENTRAL
CONTROL
to end up the centrally controlling settings
of the standard remote controllers.
It is necessary to transmit the newly set information to the relevant indoor units.
Refer to steps 4, 5 and notes of “3-3. CONTROL MODE” for details.