64
6.
TIMER SETTING
METHOD
6-3-2.
Starting weekly timer operation
Enter the control mode to the central control num-
ber (the indoor units) to perform the operation.
Refer to “3-3. CONTROL MODE” for information
about control modes.
Press
TIMER
MODE
until the segments of WEEKLY appear
on the display.
Weekly timer operation starts.
It is necessary to transmit the newly set information to the relevant indoor units.
Refer to steps 4, 5 and notes of “3-3. CONTROL MODE” for details.
Notes
To Stop Weekly Timer Operation
To stop weekly timer while leaving the air conditioner running:
Press
TIMER
MODE
to select NONSTOP.
To stop weekly timer operation as well as the air conditioner:
Press
ON OFF
(Refer to “5-2. OPERATION / STOP”).
Reviewing Time Settings
1. Press
TIMER
MODE
so that “WEEKLY” appears on the display.
2. Press
TIMER
SET
to select setting mode.
3. Press
DAY
to select the day that you want to check.
4. Press
TIME
to switch between “WEEKLY1” or “WEEKLY2” time displays.
The central remote controller generates each driving pulse signal (ON or OFF) and transmits it to the
selected indoor units at (not between) each set time. The operation conditions of the selected indoor units
are controlled by these driving pulse signal.