En-4
CAUTION
• To prevent malfunction or damage of the remote
controller:
- Place remote controller at where will not be
exposed to direct sunlight or excessive heat.
- Remove batteries if the product is not going to be
used for an extended period.
• Obstacles such as a curtain or wall between the
remote controller and the indoor unit may affect the
appropriate signal transmission.
• Do not apply strong shocks to the remote controller.
• Do not pour water on the remote controller.
For Powerful operation ................. Refer to page 7.
Activates or deactivates the Powerful
operation.
For Air
fl
ow settings ....................... Refer to page 5.
Controls the fan speed.
Sets the automatic Swing operation.
Controls the up and down air
fl
ow direction.
After replacing batteries
Press this button as shown in the following
fi
gure.
Use a tip of a ballpoint pen or other small object.
RESET
For Timer operations ..................... Refer to page 5.
Activates or deactivates the Weekly timer.
Activates or deactivates the On timer, Off
timer, or Program timer.
Activates or deactivates the Sleep timer.
Starts the timer setting.
Sends the timer or clock setting to the indoor
unit.
Forwards the timer or clock setting to the
next step.
Returns the timer or clock setting to the
previous step.
Adjusts the value of the timer or clock
settings.
Starts the clock setting.
Signal transmitter
Aim at the signal receiver of the indoor unit properly.
• Operating range is approximately 7 m.
• [ ] will appear when the signal is transmitted.
• The indoor unit will emit a beep when it receive the signal
properly. If there is no beep, press the button again.
00_9378532090_OM.indb 4
00_9378532090_OM.indb 4
2020/8/31 16:43:48
2020/8/31 16:43:48
