Fujitsu Suelo AGY25-KV Operation Manual Download Page 10

En-9

After extended non-use of the unit

If you have shut down the indoor unit for 1 month or more, perform the 
Fan mode operation for half a day to dry the internal parts thoroughly 
before the normal operation.

Additional inspection

After long period of use, accumulated dust inside the indoor unit may 
reduce the performance even if you have maintained the unit properly.
In such a case, a product inspection is recommended.
For more information, consult authorized service personnel.

 Filter indicator reset (Special setting)

This function can be used if set correctly during installation. Please 
consult authorized service personnel in order to use this function.

 

)

Clean the air 

fi

 lter when the indicator lamp show the 

following:

Indicator lamp

Blinking pattern

 

  Blinks 3 times, at intervals of 21 seconds

After cleaning, reset the 

fi

 lter indicator by pushing

 

 on the 

indoor unit for 2 seconds or less.

8. 

Set the new or washed air cleaning 

fi

 lters into the air 

cleaning 

fi

 lter frames.

NOTES: 

Use the Apple-catechin 

fi

 lter as soon as possible after opening 

the package. The air cleaning effect decreases when the 

fi

 lters 

are left in the opened package.

9. 

Install the air cleaning 

fi

 lter holders to the air 

fi

 lters.

Engage the 4 hooks at the rear of the air cleaning 

fi

 lter frame with 

the latch at both ends of the air 

fi

 lter.

* Take care that the air cleaning 

fi

 lter does not project beyond the 

frame.

Air cleaning 

fi

 lter frame

NOTES: 

Take care that the air cleaning 

fi

 lter does not project 

beyond the frame.

10. 

Replace the air 

fi

 lter and close the intake grille. Refer to 

steps 4 ~ 5 of “Cleaning air 

fi

 lter”.

Replacing Ion deodorization 

fi

 lter

1. 

Remove the air 

fi

 lters. Refer to steps 1 ~ 2 of “Cleaning air 

fi

 lter”.

2. 

Remove the Ion deodorization 

fi

 lter (light blue) from the air 

cleaning 

fi

 lter holder.

3. 

Install the new Ion deodorizing 

fi

 lter.

2. 

Remove the air 

fi

 lter.

Lift up the air 

fi

 lter and pull out.

    

3. 

Remove the dust in either of the following ways.

•  Cleaning with vacuum cleaner.
•  Washing with mild detergent and warm water. After washing, dry the 

air 

fi

 lter thoroughly in shade.

4. 

Replace the Air Filter and close the Intake Grille.

Align the sides of the air 

fi

 lter with the panel, and push in fully, 

making sure the 2 upper tabs are returned properly to their holes in 
the panel.

Air 

fi

 lter

Panel

Air 

fi

 lter

Panel

5. 

Close the intake grille. 

NOTES: 

If dirt accumulates on the air 

fi

 lter, air

fl

 ow will be reduced, 

operating  ef

fi

 ciency will lower, and the noise will increase.

Cleaning Ion deodorization 

fi

 lter and

Replacing Apple-catechin 

fi

 lter

1. 

Remove the air 

fi

 lters. Refer to steps 1 ~ 2 of “Cleaning air 

fi

 lter”.

2. 

Remove the air cleaning 

fi

 lters from the air cleaning 

fi

 lter 

holder.

Air cleaning 

fi

 lter

Air cleaning 

fi

 lter frame

3. 

Flush the Ion deodorization 

fi

 lter (light blue) with high-

pressure hot water until the surface of the 

fi

 lters are covered 

with water.

4. 

Wash the Ion deodorization 

fi

 lter with diluent neutral 

detergent.

Do not ream or rub, otherwise the deodorizing effect may decrease.

5. 

Rinse the Ion deodorization 

fi

 lter with water 

fl

 ow.

6. 

Dry the Ion deodorization 

fi

 lter in shade.

7. 

Remove the Apple-catechin 

fi

 lter (light green) from the air 

cleaning 

fi

 lter holder.

00_9378532090_OM.indb   9

00_9378532090_OM.indb   9

2020/8/31   16:43:49

2020/8/31   16:43:49

Summary of Contents for Suelo AGY25-KV














Reviews: