background image

62

S t y l i s t i c   S T 5 0 0 0   S e r i e s   T a b l e t   P C   U s e r ’ s   G u i d e   –   A p p e n d i x   A

Wireless LAN Glossary

Access point

A designation of wireless LAN network configurations. 
It indicates a form of communication using an Access 
Point. For details, refer to “access point connection” on 
page 50.

Ad hoc

A designation for wireless LAN network configuration. 
It indicates a form of communication limited to those 
personal computers which have wireless LAN function. 
For details, refer to “Ad hoc connection” on page 50.

Channel

The frequency band of wireless LAN to be used in 
communications over wireless LAN or at the access 
point.

DHCP (Dynamic Host Configuration Protocol)

A protocol used for automatically fetching communica-
tion parameters such as IP addresses. The side which 
assigns IP address is called DHCP server and the side 
that is assigned it is called DHCP client.

DNS (Domain Name System)

A function that controls the correspondence of IP 
addresses assigned to a computer with the name. Even 
for those computers whose IP addresses are unknown, if 
their names are known, it is possible to communicate 
with them.

IEEE802.11a

One of the wireless LAN standards prescribed by the 
802.11 committee in charge of establishing standards of 
LAN technology in IEEE (Institute of Electrical and 
Electronic Engineers). It allows communications at the 
maximum speed of 54 Mbps by using a 5GHz band 
which can freely be used without radio communication 
license. 

IEEE802.11b

One of the wireless LAN standards prescribed by the 
802.11 committee in charge of establishing standards of 
LAN technology in IEEE (Institute of Electrical and 
Electronic Engineers). It allows communications at the 
maximum speed of 11Mbps by a band of 2.4 GHz (ISM 
band) which can freely be used without radio communi-
cation license. 

IP address

An address used by computers for communicating in 
TCP/IP environment. IP addresses have global and 

private addresses. A global address is a unique address in 
the world. A private address is a unique address within a 
closed network.

LAN (Local Area Network)

An environment connecting computers within a rela-
tively small range, such as the same floor and building.

MAC address (Media Access Control Address)

A physical address inherent to a network card. For 
Ethernet, the top three bytes are controlled/assigned as a 
vendor code. The remaining three bytes comprise the 
code uniquely (to avoid duplication) controlled by each 
vendor. As a result, there is no Ethernet card with the 
same physical address in the world. In Ethernet, the 
frame transmission/reception is performed based on this 
address.

MTU (Maximum Transmission Unit)

The maximum size of data which can be transmitted at 
one time in networks including the Internet. In an envi-
ronment whose maximum size of data is too large to 
correctly receive data, normal communications can be 
restored by setting the size of MTU to a smaller value.

Network authentication

The method of authentication performed by wireless 
LAN clients to connect with the access point. There are 
two types: open system authentication and shared key 
authentication. The type of authentication must be set 
to each client and also coincide with the setting of access 
point with which to communicate. Network authentica-
tion is sometimes called authentication mode.

Network key

Data that is used for encrypting data in data communi-
cation. The personal computer uses the same network 
key both for data encryption and decryption, therefore, 
it is necessary to set the same network key as the other 
side of communication.

Network name (SSID: Service Set Identifier)

The network name is a unique identifier attached to the 
WLAN packet header that acts as a password when the 
client attempts to connect to a WLAN. The SSID differ-
entiates one WLAN from another so all WLAN devices 
attempting to connect to a specific WLAN must use the 
same SSID. SSID’s are transmitted in cleartext, thus 
supplying no security to the WLAN.

Ocampa3_UG.book  Page 62  Monday, August 23, 2004  9:25 AM

Summary of Contents for ST5020D - Stylistic - Pentium M 1.1 GHz





























































































Reviews: