Fujitsu SPARC Enterprise T2000, Installation Manual, Page: 74 / 88

48 SPARC Enterprise T2000 Server Installation Guide • April 2007
▼ To Reset the System
●
If it is necessary to reset the system, use the
init 6
command.
To simply reset the system, it is not necessary to power the system off and on.
▼ To Power Cycle the System
If a simple reset does not clear a system problem, you can power the system off and
on with this procedure.
1. Shut down the Solaris OS.
At the Solaris OS prompt, issue the
init 0
command to halt the Solaris OS and to
return to the
ok
prompt.
2. Switch from the system console prompt to the SC console prompt by issuing the #.
escape sequence.
syslog service starting.
volume management starting.
Creating new rsa public/private host key pair
Creating new dsa public/private host key pair
The system is ready.
wgs94-181 console login:
# init 6
# init 0
WARNING: proc_exit: init exited
syncing file systems... done
Program terminated
ok
ok #.
sc>