Fujitsu SPARC Enterprise T2000, Installation Manual, Page: 64 / 88

38 SPARC Enterprise T2000 Server Installation Guide • April 2007
You can now use the SP network management port at any time to access the system
controller. See
“To Log Into the System Controller Using the Network Management
Port” on page 43 .
Logging Into the System Controller
If you are powering on the system for the first time after installation, use the system
controller serial port to power on the system and run POST. See
“To Log Into the
System Controller Using the Serial Management Port” on page 38 .
If the network management port has already been configured, you can use it instead
of the serial management port. See
“To Log Into the System Controller Using the
Network Management Port” on page 43 .
▼ To Log Into the System Controller Using the
Serial Management Port
After the system controller boots you can access the ALOM CMT command line
interface to configure and manage the system.
The
sc
prompt is displayed at the first time the system controller is booted. The
default configuration provides an ALOM CMT user account called
admin
. There is
no default password, so you must create a password using the system controller (
sc
)
password
command.
1. If this is the first time the system has been powered on, use the
password
command to set the
admin
password.
.........................
TTYD - - PASSED
TTYC - - PASSED
MEMORY - - PASSED
MPC885 - - PASSED
sc> password
password: Changing password for admin
Setting password for admin.
New password:
new_password
Re-enter new password:
new-password
sc>